Surplus
Equipment
of
Olympic Metals
Blair Bend Road
Loudon, TN
Thursday, October 19th, 2006 10:00 AM
Inspection: Wednesday, October 18th 9-4 PM
Click here
to view the auction brochure
Click
here to view the auction catalog
Click
here to view the auction terms
Auctioneer's Comments:
Don’t miss this Surplus Equipment Absolute Auction. Olympic
Metals in Loudon, TN made the decision in 2003 to focus their
metalworking business on the new stretching and leveling technologies to
meet ISO 9000 standards required in the automotive industry. This
successful investment in the Redbud Stretcher Leveler has altered their
business and they no longer have the need for the metalworking equipment
that was part of their fabrication shop. Furrow Auction Company is
pleased to offer this well maintained fabrication equipment at Absolute
Auction.
Auction Also Includes a 50' Utility Boat
Built in Bellingham, Washington in
1980, this 50' Uniflite ex-Navy Utility Boat was formerly used to
transport up to 146 sailors and a crew of 3 from ship-to-shore and back.
It has been gutted to the hull in preparation for remodeling, and stored
inside for protection from the weather.
The boat was powered by a 671 Detroit diesel engine
with very few hours of use. It is 50' long, 15' wide at the beam, and
drafts 4.5'. Comes with: 671 Detroit engine; Allison hydraulic
transmission (1.5/1 ratio); 26' bronze prop on a 2" shaft; complete
cradles & slings; full set of original plans & government specs; and
complete steering components.
This Foam-in-Place hull has 7 layers of woven roving
and 1 layer of mat in a durable fiberglass hull for maximum flotation
and safety for our troops.
The bids will be FOB our plant in Loudon, TN. We will
gladly help find a shipper and load it, but the freight cost is yours.
Feel free to come inspect.
For price comparison check out similar Utility Boats in
"Boats and Harbors"
|
Surplus Equipment of Olympic Metals, Inc. |
|
Loudon, TN |
| |
|
Metal Fabrication Equipment |
|
(2) Wysong 1025 Power Shears w/back gauges, 10’ x
7 gage |
|
Cincinnati 1406 Shear, 6’ x ¼”, s/n 26217 |
|
Lenox Mdl 4510 Mechanical Brake 10’ x 14 gage s/n
10206 |
|
Trenjaeger Mdl. Un116 10H Abrasive Cut-off Saw |
|
Airco Mdl SBP-120 Plasma Cutting Machine w/ 10’ x
20’ water table, Aircotron 3000 controls w/ Hypertherm HT 400
Power Source s/n BP850270 |
|
(2) Trumpf & Stuttgart Mdl CN 900 Copy &
Coordinate Nibbling Machines |
|
Whitney Jensen Mdl AK 336 Punch |
|
(3) Dreiss Krump Manual Brakes (2) 8’ x 12 gage
(1) 10’ x 14 gage |
|
Niagra Model 12 Power Shear 24” x 12 gage |
| |
|
Cut-to-Length & Welding |
|
Iowa Precision “Slear II” Welty-Way Mdl. 72-12
gage Cut-to-Length, 72”w x .066”thick, slitter & shear with
De-Coiler max coil 22,000lbs s/n 67821 |
|
1984 Gary Sheet Slitter 24”L x 10’w x .066”thick
with Delta Leveler |
|
Paxon 24” Slitter 12,000lb max capacity |
|
Taylor Winfield Spotwelder |
|
(2) Airco 200 Amp Welder |
|
Hobart 300 Series Cybertig Welder on casters |
|
(2) Linde 250 Amp Welders |
|
Miller 250 Welder |
| |
|
Trucks, Trailer & Cranes, Forklifts |
|
1990 Freightliner Road Tractor w/ Sleeper, 400
Cummins, Eaton Fuller Transmission |
|
Great Dane Flatbed Trailer, sliding axle, metal
deck |
|
Ford F 7000 Single Axle Dump Truck |
|
Robbins-Myers 5-ton Overhead Crane w/25’span |
|
Clark Gas Forklift, solid, 12,000lb, 2-stage mast |
|
Towmotor 10,000lb Forklift, LP, solid, 154”, 3
stage mast |
|
David Round & Sons Model 55 Crane Hoist w/
Trolley 1000lb capacity “new in box” |
|
18’ Tag-a-long Trailer |
| |
|
Air Compressor & Support Equipment |
|
Gardner Denver 20 hp Air Compressor |
|
Thermal Arc Coolant Recirculator |
|
(3) Haldex 3 hp Hydraulic Pumps “Unused” |
|
1 mile of 6” x 20’ Sch 40 Aluminum Pipe |
|
Approximately (250) 60’ x ½” & 3/4” Coated ReBar |
|
(5) 5’ Diameter Circulating Fans |
|
5000 gallon Stainless Steel Tank 25’h x 19’d x ½”
thick |
|
Reliance 75hp HD Motor 600/1500 Continuous Duty
(Unused) |
|
Large Assortment of Parts and Supplies from
Boston Edison to include: torque wrenches, EDM Power Supplies &
Tig Weld Units, Hydraulic Motors & Pumps, test equipment, tool
mounts, bearings, fire extinguishers, Laser Plotters,
semi-conducting tape, Reel stock and more… |
| |
|
“COLLECTOR’S ITEM”
Uni-Flite Navy Utility Boat |
|
Built in Bellingham, Washington--1980, Navy
Utility Boat 146 sailors capacity, 3 crew, prepared for
remodeling, stored inside, 671 Detroit diesel w/low hours, 50' L
x 15' wide beam, drafts 4.5', Allison hydraulic transmission
(1.5/1 ratio); 26' bronze prop on a 2" shaft; complete cradles &
slings; full set of original plans & government specs; complete
steering components, Foam-in-Place hull has 7 layers of woven
roving, 1 layer of mat in a durable fiberglass hull for maximum
flotation and troop safety. |
Furrow Auction Company
(800) 438-7769 TN Lic. #62